Login to the TP-Link Archer GX90

Thumbnail image of Setup Router Staff
Setup Router Staff
Last Updated: | Reading Time: 4 minutes

Here are instructions for logging in to the TP-Link Archer GX90 router.

Other TP-Link Archer GX90 Guides

Use a VPN Instead

Have you considered using a VPN instead of forwarding a port? For most users, a VPN is a much simpler and more secure choice than forwarding a port.

We use and recommend NordVPN because not only is it the fastest VPN, it includes a new feature called Meshnet that makes forwarding a port no longer necessary for most applications. With NordVPN Meshnet, you can connect to your devices from anywhere in the world, completely secure, over a highly encrypted VPN tunnel.

When shopping for a VPN, make sure that they meet the following criteria:

  • Your VPN provider should have a no-logs policy. This means that they do not keep any logs of any kind.
  • Make sure that your VPN provider has lots of exit nodes all around the world.
  • Check that your VPN will not affect your speed.
  • Verify that your VPN provider uses WireGuard as the underlying protocol.
  • Many people prefer a VPN provider that is not based in the United States.

This is the list of requirements that we used when we were shopping around for a VPN provider. There are lots of free, shady VPN providers out there that we looked at and dismissed.

Based in Panama, using diskless servers, and with over 6,100 servers in 61 countries, we can safely say that NordVPN satisfies all of these requirements.

NordVPN is the fastest VPN!

Once you've set up your NordVPN account on multiple computers and enabled Meshnet, you can seamlessly access all of your devices as if they were on the same network. You don't even have to log in to your router. It's very simple.

Every time you click on one of our affiliate links, such as NordVPN, we get a little kickback for introducing you to the service. Think of us as your VPN wingman.

This is the login guide for the TP-Link Archer GX90 1.1.1. We also have the following guides for the same router:

Find Your TP-Link Archer GX90 Router IP Address

Before you can log in to your TP-Link Archer GX90 router, you need to figure out it's internal IP address.

Known Archer GX90 IP Addresses
192.168.0.1
http://tplinkwifi.net/

Pick one of these IP addresses and then follow the rest of this guide.

If you do not find your router's interface later in this guide, then try a different IP address. Keep trying different IP addresses until you find your router. It should be completely harmless to try different IP addresses.

If, after trying all of the above IP addresses, you still cannot find your router, then do one of the following:

Once you have the internal IP Address of your router, you can log in to it.

Don't forget to sign up for NordVPN's promo deal before it's gone.

NordVPN faster than ever deal!

You might notice that most of our site doesn't have ads on it. This is because we use partnerships with companies like NordVPN to keep the site running. Thank you for supporting us by using our referral links.

Login to the TP-Link Archer GX90 Router

The TP-Link Archer GX90 is managed through a web-based interface. You need to use a web browser to manage it, such as Chrome, Edge, or Firefox.

Enter TP-Link Archer GX90 Internal IP Address

Type the internal IP address that you picked above in the address bar of your web browser. The address bar will look like this:

Press the Enter key on your keyboard. A window will show asking for your TP-Link Archer GX90 password.

TP-Link Archer GX90 Default Username and Password

In order to login to your TP-Link Archer GX90 you are going to need to know your username and password. It's possible that the router's password is still set to the factory default. All of the default usernames and passwords for the TP-Link Archer GX90 are listed below.

TP-Link Archer GX90 Default Usernames and Passwords
UsernamePassword
nonecreated during initial setup

Enter your username and password in the dialog box that pops up. Put your username and password in the appropriate boxes.

login
This is the login page from your TP-Link Archer GX90 router.

TP-Link Archer GX90 Home Screen

Once you are logged in you will see the TP-Link Archer GX90 home screen, like this:

home
This is the home page from your TP-Link Archer GX90 router.

When you see this screen, then you are logged in to your TP-Link Archer GX90 router. You are now ready to follow one of our other guides.

Solutions To TP-Link Archer GX90 Login Problems

If you cannot get logged in to your router, here a few possible solutions you can try.

TP-Link Archer GX90 Password Doesn't Work

Perhaps your router's default password is different than what we have listed here. It doesn't hurt to try all of the other known TP-Link passwords. We have an extensive list of all TP-Link Passwords that you can try.

Forgot Password to TP-Link Archer GX90 Router

If your ISP provided your router, then you may have to call them to get your login information. They will most likely have it on file.

How to Reset the TP-Link Archer GX90 Router To Default Settings

As a last resort, you can reset your router to factory defaults. The last option when you are unable to get logged in to your router is to reset it to the factory defaults.

Other TP-Link Archer GX90 Guides

Here are some of our other TP-Link Archer GX90 info that you might be interested in.

This is the login guide for the TP-Link Archer GX90 1.1.1. We also have the following guides for the same router: