TP-Link Archer D9 v2 Login Instructions

Thumbnail image of Setup Router Staff
Setup Router Staff
(Last Updated: ) | Reading Time: 3 minutes

This page shows you how to login to the TP-Link Archer D9 v2 router.

Other TP-Link Archer D9 v2 Guides

Use a VPN Instead

Have you considered using a VPN instead of forwarding a port? For most users, a VPN is a much simpler and more secure choice than forwarding a port.

We use and recommend NordVPN because not only is it the fastest VPN, it includes a new feature called Meshnet that makes forwarding a port no longer necessary for most applications. With NordVPN Meshnet, you can connect to your devices from anywhere in the world, completely secure, over a highly encrypted VPN tunnel.

When shopping for a VPN, make sure that they meet the following criteria:

  • Your VPN provider should have a no-logs policy. This means that they do not keep any logs of any kind.
  • Make sure that your VPN provider has lots of exit nodes all around the world.
  • Check that your VPN will not affect your speed.
  • Verify that your VPN provider uses WireGuard as the underlying protocol.
  • Many people prefer a VPN provider that is not based in the United States.

This is the list of requirements that we used when we were shopping around for a VPN provider. There are lots of free, shady VPN providers out there that we looked at and dismissed.

Based in Panama, using diskless servers, and with over 6,100 servers in 61 countries, we can safely say that NordVPN satisfies all of these requirements.

NordVPN is the fastest VPN!

Once you've set up your NordVPN account on multiple computers and enabled Meshnet, you can seamlessly access all of your devices as if they were on the same network. You don't even have to log in to your router. It's very simple.

Every time you click on one of our affiliate links, such as NordVPN, we get a little kickback for introducing you to the service. Think of us as your VPN wingman.

This is the login guide for the TP-Link Archer D9 v2. We also have the following guides for the same router:

Find Your TP-Link Archer D9 v2 Router IP Address

In order to login to the TP-Link Archer D9 v2 router, we need to know it's internal IP address.

Known Archer D9 v2 IP Addresses
192.168.1.254

Choose an IP address from the list above and then follow the rest of this guide.

If the IP address you picked does not seem to work, then simply try a different one. I will not hurt anything to try different IP addresses.

If, after trying all of the above IP addresses, you still cannot find your router, then you have the following options:

The next step is to try logging in to your router.

Don't forget to sign up for NordVPN's promo deal before it's gone.

NordVPN faster than ever deal!

You might notice that most of our site doesn't have ads on it. This is because we use partnerships with companies like NordVPN to keep the site running. Thank you for supporting us by using our referral links.

Login to the TP-Link Archer D9 v2 Router

The TP-Link Archer D9 v2 router has a web-based interface. The way you manage it is by using a web browser like Firefox, Edge, or Chrome.

Enter TP-Link Archer D9 v2 Internal IP Address

Type the internal IP address that you picked above in the address bar of your web browser. Your address bar should look something like this:

Press the Enter key on your keyboard. A window will show asking for your TP-Link Archer D9 v2 password.

TP-Link Archer D9 v2 Default Username and Password

You must know your TP-Link Archer D9 v2 username and password in order to log in. Just in case the router's username and password have never been changed, you may want to try the factory defaults. All of the default usernames and passwords for the TP-Link Archer D9 v2 are listed below.

TP-Link Archer D9 v2 Default Usernames and Passwords
UsernamePassword
adminadmin

Enter your username and password in the dialog box that pops up. You can try them all.

router login screen
This is the login page from your TP-Link Archer D9 v2 router.

TP-Link Archer D9 v2 Home Screen

If your password is correct then you will be logged in and see the TP-Link Archer D9 v2 home screen, which looks like this:

router status mac address internet IP
This is the status page from your TP-Link Archer D9 v2 router.

If you see this screen, then good job, you are now logged in to your TP-Link Archer D9 v2 router. You are ready to follow any of our other guides for this router.

Solutions To TP-Link Archer D9 v2 Login Problems

Here are some things that you can try if you are having problems getting logged in to your router.

TP-Link Archer D9 v2 Password Doesn't Work

Perhaps your router's default password is different than what we have listed here. It doesn't hurt to try all of the other known TP-Link passwords. Head over to our list of all TP-Link Passwords.

Forgot Password to TP-Link Archer D9 v2 Router

If you are using an ISP provided router, then you may need to call their support desk and ask for your login information. Most of the time they will have it on file for you.

How to Reset the TP-Link Archer D9 v2 Router To Default Settings

As a last resort, you can reset your router to factory defaults. The last option when you are unable to get logged in to your router is to reset it to the factory defaults.

Other TP-Link Archer D9 v2 Guides

Here are some of our other TP-Link Archer D9 v2 info that you might be interested in.

This is the login guide for the TP-Link Archer D9 v2. We also have the following guides for the same router: