This page shows you how to login to the TP-Link Archer AX1800 v3.6 router.
Other TP-Link Archer AX1800 v3.6 Guides
Use a VPN Instead
Have you considered using a VPN instead of forwarding a port? For most users, a VPN is a much simpler and more secure choice than forwarding a port.
We use and recommend NordVPN because not only is it the fastest VPN, it includes a new feature called Meshnet that makes forwarding a port no longer necessary for most applications. With NordVPN Meshnet, you can connect to your devices from anywhere in the world, completely secure, over a highly encrypted VPN tunnel.
When shopping for a VPN, make sure that they meet the following criteria:
- Your VPN provider should have a no-logs policy. This means that they do not keep any logs of any kind.
- Make sure that your VPN provider has lots of exit nodes all around the world.
- Check that your VPN will not affect your speed.
- Verify that your VPN provider uses WireGuard as the underlying protocol.
- Many people prefer a VPN provider that is not based in the United States.
This is the list of requirements that we used when we were shopping around for a VPN provider. There are lots of free, shady VPN providers out there that we looked at and dismissed.
Based in Panama, using diskless servers, and with over 6,100 servers in 61 countries, we can safely say that NordVPN satisfies all of these requirements.
Once you've set up your NordVPN account on multiple computers and enabled Meshnet, you can seamlessly access all of your devices as if they were on the same network. You don't even have to log in to your router. It's very simple.
Every time you click on one of our affiliate links, such as NordVPN, we get a little kickback for introducing you to the service. Think of us as your VPN wingman.
This is the login guide for the TP-Link Archer AX1800 v3.6 1.1.1. We also have the following guides for the same router:
Find Your TP-Link Archer AX1800 v3.6 Router IP Address
We need to find your TP-Link Archer AX1800 v3.6 router's internal IP address before we can log in to it.
| Known Archer AX1800 v3.6 IP Addresses |
|---|
| 192.168.0.1 |
| http://tplinkwifi.net/ |
Pick one of these IP addresses and then follow the rest of this guide.
If later on in this guide you do not find your router using the IP address that you pick, then you can try different IP addresses until you get logged in. It is harmless to try different IP addresses.
If, after trying all of the above IP addresses, you still cannot find your router, then you can try one of the following steps:
- Follow our Find Your Router's Internal IP Address guide.
- Use our free Router Detector software.
The next step is to try logging in to your router.
Don't forget to sign up for NordVPN's promo deal before it's gone.
You might notice that most of our site doesn't have ads on it. This is because we use partnerships with companies like NordVPN to keep the site running. Thank you for supporting us by using our referral links.
Login to the TP-Link Archer AX1800 v3.6 Router
The TP-Link Archer AX1800 v3.6 is managed through a web-based interface. In order to log in to it, you need to use a web browser, such as Chrome, Firefox, or Edge.
Enter TP-Link Archer AX1800 v3.6 Internal IP Address
Either copy/paste or type the internal IP address of your TP-Link Archer AX1800 v3.6 router into the address bar of your web browser. The address bar will look like this:
Press the Enter key on your keyboard. You should see a window pop up asking you for your TP-Link Archer AX1800 v3.6 password.
TP-Link Archer AX1800 v3.6 Default Username and Password
In order to login to your TP-Link Archer AX1800 v3.6 you are going to need to know your username and password. If you are not sure what the username and password are, then perhaps they are still set to the factory defaults. All of the default usernames and passwords for the TP-Link Archer AX1800 v3.6 are listed below.
| TP-Link Archer AX1800 v3.6 Default Usernames and Passwords | |
|---|---|
| Username | Password |
| none | created during initial setup |
Enter your username and password in the dialog box that pops up. You can try them all.
TP-Link Archer AX1800 v3.6 Home Screen
When you get logged in you should be at the TP-Link Archer AX1800 v3.6 home screen, which looks similar to this:
If you see this screen, then you know that you are logged in to your TP-Link Archer AX1800 v3.6 router. You are ready to follow any of our other guides for this router.
Solutions To TP-Link Archer AX1800 v3.6 Login Problems
Here are some ideas to help if you are having problems getting logged in to your router.
TP-Link Archer AX1800 v3.6 Password Doesn't Work
Your router's factory default password might be different than what we have listed here. You can try other TP-Link passwords. We have an extensive list of all TP-Link Passwords that you can try.
Forgot Password to TP-Link Archer AX1800 v3.6 Router
If your Internet Service Provider supplied you with your router, then you might want to try giving them a call and see if they either know what your router's username and password are, or maybe they can reset it for you.
How to Reset the TP-Link Archer AX1800 v3.6 Router To Default Settings
The last option when you are unable to get logged in to your router is to reset it to the factory defaults. If all else fails and you are unable to login to your router, then you may have to reset it to its factory default settings.
Other TP-Link Archer AX1800 v3.6 Guides
Here are some of our other TP-Link Archer AX1800 v3.6 info that you might be interested in.
This is the login guide for the TP-Link Archer AX1800 v3.6 1.1.1. We also have the following guides for the same router: