Sitecom X4 N300 Login Instructions

This guide shows you exactly how to login to the Sitecom X4 N300 router.

Other Sitecom X4 N300 Guides

Use a VPN Instead

Have you considered using a VPN instead of forwarding a port? For most users, a VPN is a much simpler and more secure choice than forwarding a port.

We use and recommend NordVPN because not only is it the fastest VPN, it includes a new feature called Meshnet that makes forwarding a port no longer necessary for most applications. With NordVPN Meshnet, you can connect to your devices from anywhere in the world, completely secure, over a highly encrypted VPN tunnel.

When shopping for a VPN, make sure that they meet the following criteria:

• Your VPN provider should have a no-logs policy. This means that they do not keep any logs of any kind.
• Make sure that your VPN provider has lots of exit nodes all around the world.
• Check that your VPN will not affect your speed.
• Verify that your VPN provider uses WireGuard as the underlying protocol.
• Many people prefer a VPN provider that is not based in the United States.

This is the list of requirements that we used when we were shopping around for a VPN provider. There are lots of free, shady VPN providers out there that we looked at and dismissed.

Based in Panama, using diskless servers, and with over 6,100 servers in 61 countries, we can safely say that NordVPN satisfies all of these requirements.

Once you've set up your NordVPN account on multiple computers and enabled Meshnet, you can seamlessly access all of your devices as if they were on the same network. You don't even have to log in to your router. It's very simple.

Every time you click on one of our affiliate links, such as NordVPN, we get a little kickback for introducing you to the service. Think of us as your VPN wingman.

This is the login guide for the Sitecom X4 N300. We also have the following guides for the same router:

• Sitecom X4 N300 - Reset the Sitecom X4 N300
• Sitecom X4 N300 - Setup WiFi on the Sitecom X4 N300
• Sitecom X4 N300 - How to change the IP Address on a Sitecom X4 N300 router
• Sitecom X4 N300 - Sitecom X4 N300 User Manual
• Sitecom X4 N300 - Sitecom X4 N300 Screenshots
• Sitecom X4 N300 - Information About the Sitecom X4 N300 Router

Find Your Sitecom X4 N300 Router IP Address

We need to find your Sitecom X4 N300 router's internal IP address before we can log in to it.

Pick one of these IP addresses and then follow the rest of this guide.

If you do not find your router's interface later in this guide, then try a different IP address. Keep trying different IP addresses until you find your router. It is harmless to try different IP addresses.

If, after trying all of the above IP addresses, you still cannot find your router, then try the following:

• Check our out Find Your Router's Internal IP Address guide.
• Use our free Router Detector software.

After you find your router's internal IP Address, it is time to try logging in to it.

Don't forget to sign up for NordVPN's promo deal before it's gone.

Login to the Sitecom X4 N300 Router

The Sitecom X4 N300 is managed through a web-based interface. In order to log in to it, you need to use a web browser, such as Chrome, Firefox, or Edge.

Enter Sitecom X4 N300 Internal IP Address

Type the internal IP address that you picked above in the address bar of your web browser. The address bar will look like this:

Press the Enter key on your keyboard. You should see a window pop up asking you for your Sitecom X4 N300 password.

Sitecom X4 N300 Default Username and Password

You must know your Sitecom X4 N300 username and password in order to log in. Just in case the router's username and password have never been changed, you may want to try the factory defaults. All of the default usernames and passwords for the Sitecom X4 N300 are listed below.

Put your username and password in the appropriate boxes. Put your username and password in the appropriate boxes.

Sitecom X4 N300 Home Screen

You should now see the Sitecom X4 N300 home Screen, which looks similar to this:

When you see this screen, then you are logged in to your Sitecom X4 N300 router. At this point, you can follow any of our other guides for this router.

Solutions To Sitecom X4 N300 Login Problems

Here are some things that you can try if you are having problems getting logged in to your router.

Sitecom X4 N300 Password Doesn't Work

Perhaps your router's default password is different than what we have listed here. You can try other Sitecom passwords. Head over to our list of all Sitecom Passwords.

Forgot Password to Sitecom X4 N300 Router

If your Internet Service Provider supplied you with your router, then you might want to try giving them a call and see if they either know what your router's username and password are, or maybe they can reset it for you.

How to Reset the Sitecom X4 N300 Router To Default Settings

The last option when you are unable to get logged in to your router is to reset it to the factory defaults. For help resetting your router, follow our How To Reset your Router guide.

Other Sitecom X4 N300 Guides

Here are some of our other Sitecom X4 N300 info that you might be interested in.

This is the login guide for the Sitecom X4 N300. We also have the following guides for the same router:

• Sitecom X4 N300 - Reset the Sitecom X4 N300
• Sitecom X4 N300 - Setup WiFi on the Sitecom X4 N300
• Sitecom X4 N300 - How to change the IP Address on a Sitecom X4 N300 router
• Sitecom X4 N300 - Sitecom X4 N300 User Manual
• Sitecom X4 N300 - Sitecom X4 N300 Screenshots
• Sitecom X4 N300 - Information About the Sitecom X4 N300 Router