Login to the Netgear Nighthawk AX12 RAX120

Thumbnail image of Setup Router Staff
Setup Router Staff
Last Updated: | Reading Time: 4 minutes

If you need to login to the Netgear Nighthawk AX12 RAX120 router, then this guide shows you how.

Other Netgear Nighthawk AX12 RAX120 Guides

Use a VPN Instead

Have you considered using a VPN instead of forwarding a port? For most users, a VPN is a much simpler and more secure choice than forwarding a port.

We use and recommend NordVPN because not only is it the fastest VPN, it includes a new feature called Meshnet that makes forwarding a port no longer necessary for most applications. With NordVPN Meshnet, you can connect to your devices from anywhere in the world, completely secure, over a highly encrypted VPN tunnel.

When shopping for a VPN, make sure that they meet the following criteria:

  • Your VPN provider should have a no-logs policy. This means that they do not keep any logs of any kind.
  • Make sure that your VPN provider has lots of exit nodes all around the world.
  • Check that your VPN will not affect your speed.
  • Verify that your VPN provider uses WireGuard as the underlying protocol.
  • Many people prefer a VPN provider that is not based in the United States.

This is the list of requirements that we used when we were shopping around for a VPN provider. There are lots of free, shady VPN providers out there that we looked at and dismissed.

Based in Panama, using diskless servers, and with over 6,100 servers in 61 countries, we can safely say that NordVPN satisfies all of these requirements.

NordVPN is the fastest VPN!

Once you've set up your NordVPN account on multiple computers and enabled Meshnet, you can seamlessly access all of your devices as if they were on the same network. You don't even have to log in to your router. It's very simple.

Every time you click on one of our affiliate links, such as NordVPN, we get a little kickback for introducing you to the service. Think of us as your VPN wingman.

This is the login guide for the Netgear Nighthawk AX12 RAX120 v1.2.3.28. We also have the following guides for the same router:

Find Your Netgear Nighthawk AX12 RAX120 Router IP Address

In order to login to the Netgear Nighthawk AX12 RAX120 router, we need to know it's internal IP address.

Known Nighthawk AX12 RAX120 IP Addresses
192.168.1.1
http://www.routerlogin.net/

Pick one of these IP addresses and then follow the rest of this guide.

If the IP address you picked does not seem to work, then simply try a different one. It is harmless to try different IP addresses.

If you try all of the above IP addresses and still cannot find your router, then you can try one of the following steps:

Once you have the internal IP Address of your router, you can log in to it.

Don't forget to sign up for NordVPN's promo deal before it's gone.

NordVPN faster than ever deal!

You might notice that most of our site doesn't have ads on it. This is because we use partnerships with companies like NordVPN to keep the site running. Thank you for supporting us by using our referral links.

Login to the Netgear Nighthawk AX12 RAX120 Router

Your Netgear Nighthawk AX12 RAX120 router has a web interface. You can manage it by using a web browser such as Chrome, Firefox, or Edge.

Enter Netgear Nighthawk AX12 RAX120 Internal IP Address

Find the address bar in your web browser and type in the internal IP address of your Netgear Nighthawk AX12 RAX120 router. Your address bar should look something like this:

Press the Enter key on your keyboard. You should see a window asking for your Netgear Nighthawk AX12 RAX120 password.

Netgear Nighthawk AX12 RAX120 Default Username and Password

You need to know your username and password to login to your Netgear Nighthawk AX12 RAX120. Just in case the router's username and password have never been changed, you may want to try the factory defaults. Below is a list of all known Netgear Nighthawk AX12 RAX120 default usernames and passwords.

Netgear Nighthawk AX12 RAX120 Default Usernames and Passwords
UsernamePassword
adminpassword

Put your username and password in the appropriate boxes. Put your username and password in the appropriate boxes.

Netgear Nighthawk AX12 RAX120 login screen

Netgear Nighthawk AX12 RAX120 Home Screen

After you get logged in you should see the Netgear Nighthawk AX12 RAX120 home screen, which looks like this:

home
This is the home page from your Netgear Nighthawk AX12 RAX120 router.

If you see this screen, then congratulations, you are now logged in to your Netgear Nighthawk AX12 RAX120. At this point, you can follow any of our other guides for this router.

Solutions To Netgear Nighthawk AX12 RAX120 Login Problems

Here are some other ideas that might help you get logged in to your router.

Netgear Nighthawk AX12 RAX120 Password Doesn't Work

It's possible that your router's factory default password is different than what we have listed. Be sure to try other Netgear passwords. Head over to our list of all Netgear Passwords.

Forgot Password to Netgear Nighthawk AX12 RAX120 Router

If your Internet Service Provider supplied you with your router, then you might want to try giving them a call and see if they either know what your router's username and password are, or maybe they can reset it for you.

How to Reset the Netgear Nighthawk AX12 RAX120 Router To Default Settings

If you still cannot get logged in, then you are probably going to have to reset your router to its default settings. For help resetting your router, follow our How To Reset your Router guide.

Other Netgear Nighthawk AX12 RAX120 Guides

Here are some of our other Netgear Nighthawk AX12 RAX120 info that you might be interested in.

This is the login guide for the Netgear Nighthawk AX12 RAX120 v1.2.3.28. We also have the following guides for the same router: