Linksys WRT400N Login Instructions

If you need to login to the Linksys WRT400N router, then this guide shows you how.

Use a VPN Instead

Have you considered using a VPN instead of forwarding a port? For most users, a VPN is a much simpler and more secure choice than forwarding a port.

We use and recommend NordVPN because not only is it the fastest VPN, it includes a new feature called Meshnet that makes forwarding a port no longer necessary for most applications. With NordVPN Meshnet, you can connect to your devices from anywhere in the world, completely secure, over a highly encrypted VPN tunnel.

When shopping for a VPN, make sure that they meet the following criteria:

Your VPN provider should have a no-logs policy. This means that they do not keep any logs of any kind.
Make sure that your VPN provider has lots of exit nodes all around the world.
Check that your VPN will not affect your speed.
Verify that your VPN provider uses WireGuard as the underlying protocol.
Many people prefer a VPN provider that is not based in the United States.

This is the list of requirements that we used when we were shopping around for a VPN provider. There are lots of free, shady VPN providers out there that we looked at and dismissed.

Based in Panama, using diskless servers, and with over 6,100 servers in 61 countries, we can safely say that NordVPN satisfies all of these requirements.

Once you've set up your NordVPN account on multiple computers and enabled Meshnet, you can seamlessly access all of your devices as if they were on the same network. You don't even have to log in to your router. It's very simple.

Every time you click on one of our affiliate links, such as NordVPN, we get a little kickback for introducing you to the service. Think of us as your VPN wingman.

This is the login guide for the Linksys WRT400N. We also have the following guides for the same router:

Linksys WRT400N - How to change the IP Address on a Linksys WRT400N router

Linksys WRT400N - Linksys WRT400N User Manual

Linksys WRT400N - How to change the DNS settings on a Linksys WRT400N router

Linksys WRT400N - Setup WiFi on the Linksys WRT400N

Linksys WRT400N - How to Reset the Linksys WRT400N

Linksys WRT400N - Information About the Linksys WRT400N Router

Linksys WRT400N - Linksys WRT400N Screenshots

Find Your Linksys WRT400N Router IP Address

Before you can log in to your Linksys WRT400N router, you need to figure out it's internal IP address.

Known WRT400N IP Addresses
192.168.1.2
192.168.1.1

Start with the first IP address in the list and then follow the rest of this guide.

If the IP address you picked does not seem to work, then simply try a different one. It is harmless to try different IP addresses.

If, after trying all of the above IP addresses, you still cannot find your router, then you have the following options:

Check our out Find Your Router's Internal IP Address guide.
Use our free Router Detector software.

Choose an internal IP Address using one of the above methods and then try to login to your router.

Don't forget to sign up for NordVPN's promo deal before it's gone.

You might notice that most of our site doesn't have ads on it. This is because we use partnerships with companies like NordVPN to keep the site running. Thank you for supporting us by using our referral links.

Login to the Linksys WRT400N Router

Your Linksys WRT400N is managed through a web-based interface. You can manage it by using a web browser such as Chrome, Firefox, or Edge.

Enter Linksys WRT400N Internal IP Address

Either copy/paste or type the internal IP address of your Linksys WRT400N router into the address bar of your web browser. The address bar will look like this:

Press the Enter key on your keyboard. You will see a window asking for your Linksys WRT400N password.

Linksys WRT400N Default Username and Password

You need to know your username and password to login to your Linksys WRT400N. It's possible that the router's password is still set to the factory default. Try all of the Linksys WRT400N factory default usernames and passwords below.

Linksys WRT400N Default Usernames and Passwords
Username	Password
admin	admin
blank	admin

Put your username and password in the appropriate boxes. You can try them all.

Linksys WRT400N login screen

Linksys WRT400N Home Screen

You should now see the Linksys WRT400N home Screen, which looks similar to this:

router status mac address internet IP — This is the *status* page from your Linksys WRT400N router.

If you see this screen, then congratulations, you are now logged in to your Linksys WRT400N. You are now ready to follow one of our other guides.

Solutions To Linksys WRT400N Login Problems

If things are not going right and you are unable to login to your router, then here are some other things that you can try.

Linksys WRT400N Password Doesn't Work

It's possible that your router's factory default password is different than what we have listed. Start by trying all of the other known Linksys passwords. We have a large list of all Linksys Passwords that you can try.

Forgot Password to Linksys WRT400N Router

If you are using an ISP provided router, then you may need to call their support desk and ask for your login information. Most of the time they will have it on file for you.

How to Reset the Linksys WRT400N Router To Default Settings

Your last option when you are unable to get logged in is to reset your router to factory default settings. The last option when you are unable to get logged in to your router is to reset it to the factory defaults.