Linksys WCG200 Login Instructions

If you need to login to the Linksys WCG200 router, then this guide shows you how.

Use a VPN Instead

Have you considered using a VPN instead of forwarding a port? For most users, a VPN is a much simpler and more secure choice than forwarding a port.

We use and recommend NordVPN because not only is it the fastest VPN, it includes a new feature called Meshnet that makes forwarding a port no longer necessary for most applications. With NordVPN Meshnet, you can connect to your devices from anywhere in the world, completely secure, over a highly encrypted VPN tunnel.

When shopping for a VPN, make sure that they meet the following criteria:

Your VPN provider should have a no-logs policy. This means that they do not keep any logs of any kind.
Make sure that your VPN provider has lots of exit nodes all around the world.
Check that your VPN will not affect your speed.
Verify that your VPN provider uses WireGuard as the underlying protocol.
Many people prefer a VPN provider that is not based in the United States.

This is the list of requirements that we used when we were shopping around for a VPN provider. There are lots of free, shady VPN providers out there that we looked at and dismissed.

Based in Panama, using diskless servers, and with over 6,100 servers in 61 countries, we can safely say that NordVPN satisfies all of these requirements.

Once you've set up your NordVPN account on multiple computers and enabled Meshnet, you can seamlessly access all of your devices as if they were on the same network. You don't even have to log in to your router. It's very simple.

Every time you click on one of our affiliate links, such as NordVPN, we get a little kickback for introducing you to the service. Think of us as your VPN wingman.

This is the login guide for the Linksys WCG200 v2. We also have the following guides for the same router:

Linksys WCG200 - How to change the IP Address on a Linksys WCG200 router

Linksys WCG200 - Linksys WCG200 User Manual

Linksys WCG200 - Linksys WCG200 Login Instructions

Linksys WCG200 - Setup WiFi on the Linksys WCG200

Linksys WCG200 - How to Reset the Linksys WCG200

Linksys WCG200 - Information About the Linksys WCG200 Router

Linksys WCG200 - Linksys WCG200 Screenshots

Linksys WCG200 v2 - How to change the IP Address on a Linksys WCG200 router

Linksys WCG200 v2 - Linksys WCG200 User Manual

Linksys WCG200 v2 - Setup WiFi on the Linksys WCG200

Linksys WCG200 v2 - How to Reset the Linksys WCG200

Linksys WCG200 v2 - Information About the Linksys WCG200 Router

Linksys WCG200 v2 - Linksys WCG200 Screenshots

Find Your Linksys WCG200 Router IP Address

We need to find your Linksys WCG200 router's internal IP address before we can log in to it.

Known WCG200 IP Addresses
192.168.0.1

Choose an IP address from the list above and then follow the rest of this guide.

If later on in this guide you do not find your router using the IP address that you pick, then you can try different IP addresses until you get logged in. I will not hurt anything to try different IP addresses.

If, after trying all of the above IP addresses, you still cannot find your router, then try the following:

Check our out Find Your Router's Internal IP Address guide.
Download and install our free Router Detector software.

Choose an internal IP Address using one of the above methods and then try to login to your router.

Don't forget to sign up for NordVPN's promo deal before it's gone.

You might notice that most of our site doesn't have ads on it. This is because we use partnerships with companies like NordVPN to keep the site running. Thank you for supporting us by using our referral links.

Login to the Linksys WCG200 Router

The Linksys WCG200 is managed through a web-based interface. In order to log in to it, you need to use a web browser, such as Chrome, Firefox, or Edge.

Enter Linksys WCG200 Internal IP Address

Find the address bar in your web browser and type in the internal IP address of your Linksys WCG200 router. The address bar will look like this:

Press the Enter key on your keyboard. You should see a window pop up asking you for your Linksys WCG200 password.

Linksys WCG200 Default Username and Password

You need to know your username and password to login to your Linksys WCG200. It's possible that the router's password is still set to the factory default. All of the default usernames and passwords for the Linksys WCG200 are listed below.

Linksys WCG200 Default Usernames and Passwords
Username	Password
blank	admin

Enter your username and password in the dialog box that pops up. You should be able to try them all.

Linksys WCG200 login screen

Linksys WCG200 Home Screen

If your password is correct then you will be logged in and see the Linksys WCG200 home screen, which looks like this:

router status mac address internet IP — This is the *status* page from your Linksys WCG200 router.

If you see this screen, then congratulations, you are now logged in to your Linksys WCG200. Now you can follow any of our other guides for this router.

Solutions To Linksys WCG200 Login Problems

If you are having problems getting logged in to your router, here are a few ideas for you to try.

Linksys WCG200 Password Doesn't Work

Perhaps your router's default password is different than what we have listed here. Be sure to try other Linksys passwords. We have an extensive list of all Linksys Passwords that you can try.

Forgot Password to Linksys WCG200 Router

If you are using an ISP provided router, then you may need to call their support desk and ask for your login information. Most of the time they will have it on file for you.

How to Reset the Linksys WCG200 Router To Default Settings

As a last resort, you can reset your router to factory defaults. As a last resort, you can reset your router to factory defaults.