Linksys WAP200E Login Instructions

This page shows you how to login to the Linksys WAP200E router.

Use a VPN Instead

Have you considered using a VPN instead of forwarding a port? For most users, a VPN is a much simpler and more secure choice than forwarding a port.

We use and recommend NordVPN because not only is it the fastest VPN, it includes a new feature called Meshnet that makes forwarding a port no longer necessary for most applications. With NordVPN Meshnet, you can connect to your devices from anywhere in the world, completely secure, over a highly encrypted VPN tunnel.

When shopping for a VPN, make sure that they meet the following criteria:

Your VPN provider should have a no-logs policy. This means that they do not keep any logs of any kind.
Make sure that your VPN provider has lots of exit nodes all around the world.
Check that your VPN will not affect your speed.
Verify that your VPN provider uses WireGuard as the underlying protocol.
Many people prefer a VPN provider that is not based in the United States.

This is the list of requirements that we used when we were shopping around for a VPN provider. There are lots of free, shady VPN providers out there that we looked at and dismissed.

Based in Panama, using diskless servers, and with over 6,100 servers in 61 countries, we can safely say that NordVPN satisfies all of these requirements.

Once you've set up your NordVPN account on multiple computers and enabled Meshnet, you can seamlessly access all of your devices as if they were on the same network. You don't even have to log in to your router. It's very simple.

Every time you click on one of our affiliate links, such as NordVPN, we get a little kickback for introducing you to the service. Think of us as your VPN wingman.

This is the login guide for the Linksys WAP200E. We also have the following guides for the same router:

Linksys WAP200E - How to change the IP Address on a Linksys WAP200E router

Linksys WAP200E - Linksys WAP200E User Manual

Linksys WAP200E - How to change the DNS settings on a Linksys WAP200E router

Linksys WAP200E - Setup WiFi on the Linksys WAP200E

Linksys WAP200E - How to Reset the Linksys WAP200E

Linksys WAP200E - Linksys WAP200E Screenshots

Linksys WAP200E - Information About the Linksys WAP200E Router

Find Your Linksys WAP200E Router IP Address

Before you can log in to your Linksys WAP200E router, you need to figure out it's internal IP address.

Known WAP200E IP Addresses
192.168.1.245

Start with the first IP address in the list and then follow the rest of this guide.

If the IP address you picked does not seem to work, then simply try a different one. It is harmless to try different IP addresses.

If you try all of the above IP addresses and still cannot find your router, then you can try one of the following steps:

Follow our guide called Find Your Router's Internal IP Address.
Use our free software called Router Detector.

After you find your router's internal IP Address, it is time to try logging in to it.

Don't forget to sign up for NordVPN's promo deal before it's gone.

You might notice that most of our site doesn't have ads on it. This is because we use partnerships with companies like NordVPN to keep the site running. Thank you for supporting us by using our referral links.

Login to the Linksys WAP200E Router

The Linksys WAP200E is managed through a web-based interface. In order to log in to it, you need to use a web browser, such as Chrome, Firefox, or Edge.

Enter Linksys WAP200E Internal IP Address

Either copy/paste or type the internal IP address of your Linksys WAP200E router into the address bar of your web browser. The address bar will look like this:

Press the Enter key on your keyboard. You should see a window pop up asking you for your Linksys WAP200E password.

Linksys WAP200E Default Username and Password

You need to know your username and password to login to your Linksys WAP200E. It's possible that the router's password is still set to the factory default. Try all of the Linksys WAP200E factory default usernames and passwords below.

Linksys WAP200E Default Usernames and Passwords
Username	Password
admin	admin

Enter your username and password in the window that pops up. Put your username and password in the appropriate boxes.

Linksys WAP200E login screen

Linksys WAP200E Home Screen

When you get logged in you should be at the Linksys WAP200E home screen, which looks similar to this:

router status mac address internet IP — This is the *status* page from your Linksys WAP200E router.

If you see this screen, then congratulations, you are now logged in to your Linksys WAP200E. Now you can follow any of our other guides for this router.

Solutions To Linksys WAP200E Login Problems

Here are some ideas to help if you are having problems getting logged in to your router.

Linksys WAP200E Password Doesn't Work

Perhaps your router's default password is different than what we have listed here. Start by trying all of the other known Linksys passwords. Here is our list of all Linksys Passwords.

Forgot Password to Linksys WAP200E Router

If you are using an ISP provided router, then you may need to call their support desk and ask for your login information. Most of the time they will have it on file for you.

How to Reset the Linksys WAP200E Router To Default Settings

The last option when you are unable to get logged in to your router is to reset it to the factory defaults. For help resetting your router, follow our How To Reset your Router guide.