Linksys WAG200G Login Instructions

Here are instructions for logging in to the Linksys WAG200G router.

Use a VPN Instead

Have you considered using a VPN instead of forwarding a port? For most users, a VPN is a much simpler and more secure choice than forwarding a port.

We use and recommend NordVPN because not only is it the fastest VPN, it includes a new feature called Meshnet that makes forwarding a port no longer necessary for most applications. With NordVPN Meshnet, you can connect to your devices from anywhere in the world, completely secure, over a highly encrypted VPN tunnel.

When shopping for a VPN, make sure that they meet the following criteria:

Your VPN provider should have a no-logs policy. This means that they do not keep any logs of any kind.
Make sure that your VPN provider has lots of exit nodes all around the world.
Check that your VPN will not affect your speed.
Verify that your VPN provider uses WireGuard as the underlying protocol.
Many people prefer a VPN provider that is not based in the United States.

This is the list of requirements that we used when we were shopping around for a VPN provider. There are lots of free, shady VPN providers out there that we looked at and dismissed.

Based in Panama, using diskless servers, and with over 6,100 servers in 61 countries, we can safely say that NordVPN satisfies all of these requirements.

Once you've set up your NordVPN account on multiple computers and enabled Meshnet, you can seamlessly access all of your devices as if they were on the same network. You don't even have to log in to your router. It's very simple.

Every time you click on one of our affiliate links, such as NordVPN, we get a little kickback for introducing you to the service. Think of us as your VPN wingman.

This is the login guide for the Linksys WAG200G. We also have the following guides for the same router:

Linksys WAG200G - How to change the IP Address on a Linksys WAG200G router

Linksys WAG200G - Linksys WAG200G User Manual

Linksys WAG200G - How to change the DNS settings on a Linksys WAG200G router

Linksys WAG200G - Setup WiFi on the Linksys WAG200G

Linksys WAG200G - How to Reset the Linksys WAG200G

Linksys WAG200G - Information About the Linksys WAG200G Router

Linksys WAG200G - Linksys WAG200G Screenshots

Find Your Linksys WAG200G Router IP Address

We need to find your Linksys WAG200G router's internal IP address before we can log in to it.

Known WAG200G IP Addresses
192.168.1.1

Start with the first IP address in the list and then follow the rest of this guide.

If you do not find your router's interface later in this guide, then try a different IP address. Keep trying different IP addresses until you find your router. I will not hurt anything to try different IP addresses.

If you try all of the above IP addresses and still cannot find your router, then do one of the following:

Follow our guide called Find Your Router's Internal IP Address.
Use our free software called Router Detector.

Choose an internal IP Address using one of the above methods and then try to login to your router.

Don't forget to sign up for NordVPN's promo deal before it's gone.

You might notice that most of our site doesn't have ads on it. This is because we use partnerships with companies like NordVPN to keep the site running. Thank you for supporting us by using our referral links.

Login to the Linksys WAG200G Router

The Linksys WAG200G is managed through a web-based interface. You can manage it by using a web browser such as Chrome, Firefox, or Edge.

Enter Linksys WAG200G Internal IP Address

Put the internal IP Address of your Linksys WAG200G in the address bar of your web browser. The address bar will look like this:

Press the Enter key on your keyboard. You will be prompted for your Linksys WAG200G password.

Linksys WAG200G Default Username and Password

In order to login to your Linksys WAG200G you are going to need to know your username and password. If you are not sure what the username and password are, then perhaps they are still set to the factory defaults. Try all of the Linksys WAG200G factory default usernames and passwords below.

Linksys WAG200G Default Usernames and Passwords
Username	Password
admin	admin

Enter your username and password in the dialog box that pops up. Put your username and password in the appropriate boxes.

Linksys WAG200G login screen

Linksys WAG200G Home Screen

After you get logged in you should see the Linksys WAG200G home screen, which looks like this:

router status mac address internet IP — This is the *status* page from your Linksys WAG200G router.

When you see this screen, then you are logged in to your Linksys WAG200G router. Now you can follow any of our other guides for this router.

Solutions To Linksys WAG200G Login Problems

Here are some other ideas that might help you get logged in to your router.

Linksys WAG200G Password Doesn't Work

Your router's factory default password might be different than what we have listed here. It doesn't hurt to try all of the other known Linksys passwords. We have an extensive list of all Linksys Passwords that you can try.

Forgot Password to Linksys WAG200G Router

If your ISP provided your router, then you may have to call them to get your login information. They will most likely have it on file.

How to Reset the Linksys WAG200G Router To Default Settings

Your last option when you are unable to get logged in is to reset your router to factory default settings. You can follow our How To Reset your Router guide for help.