Setup Router logo in white Setup router name logo in white
Get Software

Dynalink RTA1046VW Login Instructions

Thumbnail image of Setup Router Staff
Setup Router Staff
(Last Updated: ) | Reading Time: 3 minutes

This guide shows you exactly how to login to the Dynalink RTA1046VW router.

Other Dynalink RTA1046VW Guides

Use a VPN Instead

Have you considered using a VPN instead of forwarding a port? For most users, a VPN is a much simpler and more secure choice than forwarding a port.

We use and recommend NordVPN because not only is it the fastest VPN, it includes a new feature called Meshnet that makes forwarding a port no longer necessary for most applications. With NordVPN Meshnet, you can connect to your devices from anywhere in the world, completely secure, over a highly encrypted VPN tunnel.

When shopping for a VPN, make sure that they meet the following criteria:

  • Your VPN provider should have a no-logs policy. This means that they do not keep any logs of any kind.
  • Make sure that your VPN provider has lots of exit nodes all around the world.
  • Check that your VPN will not affect your speed.
  • Verify that your VPN provider uses WireGuard as the underlying protocol.
  • Many people prefer a VPN provider that is not based in the United States.

This is the list of requirements that we used when we were shopping around for a VPN provider. There are lots of free, shady VPN providers out there that we looked at and dismissed.

Based in Panama, using diskless servers, and with over 6,100 servers in 61 countries, we can safely say that NordVPN satisfies all of these requirements.

NordVPN is the fastest VPN!

Once you've set up your NordVPN account on multiple computers and enabled Meshnet, you can seamlessly access all of your devices as if they were on the same network. You don't even have to log in to your router. It's very simple.

Every time you click on one of our affiliate links, such as NordVPN, we get a little kickback for introducing you to the service. Think of us as your VPN wingman.

This is the login guide for the Dynalink RTA1046VW. We also have the following guides for the same router:

Find Your Dynalink RTA1046VW Router IP Address

Before you can log in to your Dynalink RTA1046VW router, you need to figure out it's internal IP address.

Known RTA1046VW IP Addresses
192.168.1.1

Pick one of these IP addresses and then follow the rest of this guide.

If you do not find your router's interface later in this guide, then try a different IP address. Keep trying different IP addresses until you find your router. I will not hurt anything to try different IP addresses.

If you try all of the above IP addresses and still cannot find your router, then try the following:

The next step is to try logging in to your router.

Don't forget to sign up for NordVPN's promo deal before it's gone.

NordVPN faster than ever deal!

You might notice that most of our site doesn't have ads on it. This is because we use partnerships with companies like NordVPN to keep the site running. Thank you for supporting us by using our referral links.

Login to the Dynalink RTA1046VW Router

Your Dynalink RTA1046VW is managed through a web-based interface. The way you manage it is by using a web browser like Firefox, Edge, or Chrome.

Enter Dynalink RTA1046VW Internal IP Address

Find the address bar in your web browser and type in the internal IP address of your Dynalink RTA1046VW router. The address bar will look like this:

Press the Enter key on your keyboard. You will be prompted for your Dynalink RTA1046VW password.

Dynalink RTA1046VW Default Username and Password

You need to know your username and password to login to your Dynalink RTA1046VW. If you are not sure what the username and password are, then perhaps they are still set to the factory defaults. Below is a list of all known Dynalink RTA1046VW default usernames and passwords.

Dynalink RTA1046VW Default Usernames and Passwords
UsernamePassword
adminadmin

Enter your username and password in the window that pops up. You should be able to try them all.

Dynalink RTA1046VW login screen

Dynalink RTA1046VW Home Screen

You should now see the Dynalink RTA1046VW home Screen, which looks similar to this:

router status mac address internet IP
This is the status page from your Dynalink RTA1046VW router.

When you see this screen, then you are logged in to your Dynalink RTA1046VW router. At this point, you can follow any of our other guides for this router.

Solutions To Dynalink RTA1046VW Login Problems

Here are some other ideas that might help you get logged in to your router.

Dynalink RTA1046VW Password Doesn't Work

Your router's factory default password might be different than what we have listed here. You should try other Dynalink passwords. Head over to our list of all Dynalink Passwords.

Forgot Password to Dynalink RTA1046VW Router

If your ISP provided your router, then you may have to call them to get your login information. They will most likely have it on file.

How to Reset the Dynalink RTA1046VW Router To Default Settings

The last option when you are unable to get logged in to your router is to reset it to the factory defaults. For help resetting your router, follow our How To Reset your Router guide.

Other Dynalink RTA1046VW Guides

Here are some of our other Dynalink RTA1046VW info that you might be interested in.

This is the login guide for the Dynalink RTA1046VW. We also have the following guides for the same router: